RHEINZINK-PV

RHEINZINK-PV – Simply aesthetic Not many solar systems offer an archite¬turally appealing solution for metal roofs. With RHEINZINK-PV, there is now a so¬lution available that is integrated in the roof and is visually adapted to the stan¬ding seam system. With RHEINZINK-PV, it is now possible to clad RHEINZINK double standing seam roofs having centre-to-centre mea¬surements of 530 mm (600 coil width) and 430 mm (500 coil width) with solar modules adapted specifically to the seam geometry. An innovative System A module clamp fitted to the standing seams with just one screw ensures the optimum fastening of the solar modules. The amount of module clamps to be used is based on the number of clips and de¬pends on the object-related wind loads. A connection box installed on the bottom side of the solar modules ensures their electrical connection. Overall, there is an installation height of about 40 mm. The arrangement of the glass modules is therefore only slightly above the standing seams. An intelligent Solution The patented seam or module clamp convinces with a completely new type of clamping principle. It is affixed solely through vertical clamping on the double standing seam, simultaneously allowing the installation of the frameless solar mo¬dules. The module clamp is now mounted to the seam with just one socket head screw and tightened with 6 Nm. This does not affect the thermal elongation of the double standing seam section.